Migration Macbook Pro Mid 2015 to Macbook Pro 16" creating image fails

Hi @ all,
i try to Migrate to my new 16" Macbook Pro 2019 from a Mid2015 Macbook Pro but creating a winclone image with latest Version 8 is impossible. i get following error message in Winclone after one minute:
Cloning Error: The file couldn’t be opened.

the next message says:
the image was created successfully…
but in my harddrive i can find an uncomplete winclone file with only 611 kilobytes

OS: Mojave 10.14.6 (all security patches and os updates are up to date)

Here Some infos from Systeminformation->Software:

(Systemintegritätsschutz: Deaktiviert … translated from German means SIP status disabled)

Log:
2020-06-07T23:11:17+02:00:hiberfil exists…probing…
2020-06-07T23:11:22+02:00:We have Windows, but no BOOT folder, so checking to see if there is another partition on the same drive that has the folder. If so, we have a split boot config, and will grab the boot files
2020-06-07T23:11:29+02:00:Setting to not sleep…
2020-06-07T23:11:29+02:00:Writing Version of Windows to Image
2020-06-07T23:11:33+02:00:Saving Partition Type, 2.000000% complete
2020-06-07T23:11:33+02:00:Could not read /dev/disk0. Probably due to SIP. Ignoring and returning 0x07
2020-06-07T23:11:33+02:00:Saving Filesize, 3.000000% complete
2020-06-07T23:12:03+02:00:Helper tool error: The file couldn’t be opened.
2020-06-07T23:14:28+02:00:Setting the system to allow sleep…

best regards
chris

please try reinstalling winclone. it sounds like the helper tool did not get installed.

OK thanks for fast response, i give it a try now

hi, still same problem after reinstall… i installed helper tool… request of admin pass was also done after the “install helper tool message” after admin password i got message “The helper tool has been installed successfully”

second log:

2020-06-07T23:41:01+02:00:Winclone 8.2 (48121)
2020-06-07T23:41:01+02:00:Product ID:Winclone Standard
2020-06-07T23:41:01+02:00:Licensed to XXXXXXXXXXXXXXXXXXXXXX
2020-06-07T23:41:01+02:00:License Key XXXXXXXXXXXXXXXXXXXXXX
2020-06-07T23:41:01+02:00:Model Identifier: MacBookPro11,5
2020-06-07T23:41:01+02:00:=================diskutil list=================
2020-06-07T23:41:01+02:00:/dev/disk0 (internal):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme 1.0 TB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_APFS Container disk1 460.1 GB disk0s2
3: Microsoft Basic Data BOOTCAMP 539.9 GB disk0s3

/dev/disk1 (synthesized):
#: TYPE NAME SIZE IDENTIFIER
0: APFS Container Scheme - +460.1 GB disk1
Physical Store disk0s2
1: APFS Volume Macintosh HD 303.9 GB disk1s1
2: APFS Volume Preboot 43.3 MB disk1s2
3: APFS Volume Recovery 510.5 MB disk1s3
4: APFS Volume VM 1.1 GB disk1s4

/dev/disk2 (external, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *512.1 GB disk2
1: EFI EFI 209.7 MB disk2s1
2: Apple_APFS Container disk3 511.9 GB disk2s2

/dev/disk3 (synthesized):
#: TYPE NAME SIZE IDENTIFIER
0: APFS Container Scheme - +511.9 GB disk3
Physical Store disk2s2
1: APFS Volume Clone 938.0 KB disk3s1

/dev/disk4 (disk image):
#: TYPE NAME SIZE IDENTIFIER
0: Apple_partition_scheme +36.5 MB disk4
1: Apple_partition_map 32.3 KB disk4s1
2: Apple_HFS Winclone 36.5 MB disk4s2

2020-06-07T23:41:01+02:00:===============================================
2020-06-07T23:41:39+02:00:hiberfil exists…probing…
2020-06-07T23:41:44+02:00:We have Windows, but no BOOT folder, so checking to see if there is another partition on the same drive that has the folder. If so, we have a split boot config, and will grab the boot files
2020-06-07T23:42:06+02:00:Setting to not sleep…
2020-06-07T23:42:06+02:00:Writing Version of Windows to Image
2020-06-07T23:42:07+02:00:Starting Helper Tool
2020-06-07T23:42:07+02:00:setting up listener for mach service com.twocanoes.WincloneHelper
2020-06-07T23:42:07+02:00:Getting new connection request
2020-06-07T23:42:09+02:00:Saving Partition Type, 2.000000% complete
2020-06-07T23:42:09+02:00:Could not read /dev/disk0. Probably due to SIP. Ignoring and returning 0x07
2020-06-07T23:42:09+02:00:Saving Filesize, 3.000000% complete
2020-06-07T23:42:39+02:00:Helper tool error: The file couldn’t be opened.
2020-06-07T23:42:50+02:00:Setting the system to allow sleep…

i also tried different SSD’s they definetely writable…

i solved the problem, “ntfs for mac 15” from Paragon Software was the problem, the Bootcamp drive was activated for NTFS write acces with the Paragon NTFS file system driver, i deactived the driver now image creation with Winclone is working.